Sandisk Ultra II SD Plus not recognized

Jelmer H.F. Hulstijn · Joined: 10 Dec 2007 Posts: 2

Hello,

i have just purchased a Sandisk Ultra II Plus 2GB SD card and want it to use
in my Qtek S110 PocketPC. I used it first on my computer to transfer files
and it works fine (as an usb-stick). It also works fine as an SD card in my
Panasonic FZ18 digital camera. But when i insert it into my Qtek, it keeps
asking to format the card to become readable. I also have a normal Ultra II
2GB SD (not Plus) and this one works fine, without formatting in the
PocketPC. Can you help me, or point me to a sollution? It is obvious that
the card does work and that my Qtek S110 supports 2GB SD cards, so that's
not the problem.

Thanks in advance.

Dear regards,

Jelmer H.F. Hulstijn

Archived from group: microsoft>public>pocketpc>phone_edition

Jelmer H.F. Hulstijn · Joined: 10 Dec 2007 Posts: 2

I just solved the problem: the Plus card didn't make enough (or any, at
first) contact. So at some point (after a lot of trying), my Qtek only
recognized 128MB and when i sticked a few tiny pieces of paper the
upper-opposite side of the connectors, it makes contact and the Qtek
recognizes (almost) 2GB. So, once again... nasty problem, simple solution.

Jelmer H.F. Hulstijn

"Jelmer H.F. Hulstijn" wrote in message @TK2MSFTNGP04.phx.gbl...
> Hello,
>
> i have just purchased a Sandisk Ultra II Plus 2GB SD card and want it to
> use in my Qtek S110 PocketPC. I used it first on my computer to transfer
> files and it works fine (as an usb-stick). It also works fine as an SD
> card in my Panasonic FZ18 digital camera. But when i insert it into my
> Qtek, it keeps asking to format the card to become readable. I also have a
> normal Ultra II 2GB SD (not Plus) and this one works fine, without
> formatting in the PocketPC. Can you help me, or point me to a sollution?
> It is obvious that the card does work and that my Qtek S110 supports 2GB
> SD cards, so that's not the problem.
>
> Thanks in advance.
>
>
> Dear regards,
>
> Jelmer H.F. Hulstijn
>

SD card not recognized on T-Mobile PPC Phone I just got the T-Mobile PPC Phone Edition (XDA) and a Lexar 256meg SD card. (btw ... the PPC is only $199 after rebate with a 1-year T-Mobile contract at amazon.com) The card reads and writes successfully in the card reader attached to my desktop computer

I cannot get my phone to be recognized My ppc 6700 only connected once to my laptop, and an error message appeared and a physical dump of memory followed.. Then my device will not sync.!!? I have upgraded to 4.2 but still my device will not sync with active sync... Running windows xp, all upd

Activesync USB not recognized I just got a new Axim X51v and am having problems getting the USB connection working. I have a laptop and a desktop, both running XP/SP2. When I first installed Activesync 4.0, I got the dreaded BSOD when I connected the device to USB. I cannot eliminate

Pocket PC not recognized... ANYMORE Hi everybody, I've got a peculiar problem. My IPAQ hx4700 has worked perfectly up 'till now, but now somehow my PC (Windows XP) doesn't recognize it anymore, while it did so just a week ago. Not only does it refuse to Activesync, but Windows also gives an

Ipaq 3950 and sd wificard sandisk At last I got the wifi sandisk card !!! .... bad surprise that although i updated the most recent bios and sdio update my 3950 cant recognize the card ! How can I be sure the problem is the hardware and not the settings or compatibilty with my ppc ?? Than